Today we are going to learn how to install openvpn3 client on Ubuntu 20.04 using the command line. For those who don’t know, the client is what connects to your openvpn service provider and tunnels its connection out to your openvpn service provider.

In this tutorial we will take the following steps to complete this task:

  1. Add openvpn3 repository to your apt sources.list to get automatic updates.
  2. Install the OpenVPN3 repository signing key
  3. Install OpenVPN3
  4. Download and modify your my-openvpn-client-config-file.ovpn to work with openvpn3
  5. Create a simple yet secure and useful my-openvpn3-client-config-file.autoload file to automatically load openvpn3 at boot time and start up.
  6. Create a simple yet secure and useful my-openvpn3-client-config.file.autoload file to automatically reconnect openvpn after it unexpectedly disconnects.
  7. Enable openvpn3 permanantely to connect on boot and after any unexpected disconnects.

Lets begin.

1st,

Open open up your terminal and run the following command to add openvpn3 to your apt repository…

sudo nano /etc/apt/sources.list.d/openvpn3.list

Your nano text editor will open up and your terminal should be blank. Then you must copy and paste the following lines into your nano editor:

# OpenVPN3 Official Apt Repository for openvpn3.
deb https://swupdate.openvpn.net/community/openvpn3/repos focal main

Once you have pasted the text into your nano text editor (using the terminal), you can save and exit by typing “Control-X“, then hit “y” for the save option, then hit “Enter” to save and exit nano.

2nd,

Ensure your apt supports the https transport by installing apt-transport-https. Then install the OpenVPN3 repository signing key used by the openVPN 3 Linux packages. You can do all of this by running the following commands:

cd ~/
sudo apt install apt-transport-https && wget https://swupdate.openvpn.net/repos/openvpn-repo-pkg-key.pub && sudo apt-key add openvpn-repo-pkg-key.pub
rm ~/openvpn-repo-pkg-key.pub

Now, you can install your openvpn3 package with the following command:

sudo apt update && sudo apt install openvpn3

Now, navigate to /etc/openvpn3/autoload.

cd /etc/openvpn3/autoload/

Download your openvpn.ovpn configuration file from your vpn service provider and open it with a text editor. Then add the following to its configuration with each option on its own seperate line:

auth-user-pass
push-peer-info
resolv-retry infinite
persist-key
persist-tun
keepalive 10 120

Now, copy all of the text in your openvpn.ovpn file that you downloaded and edited, and paste it into a new file called “myvpn3client.conf” located in the /etc/openvpn3/autoload directory, using nano.

sudo nano /etc/openvpn3/autoload/myvpn3client.conf

Type ctrl+x, y, then Enter, to save your file.

Now, create your autoload file by openining up your nano editor with the following command:

cd /etc/openvpn3/autoload && sudo nano myvpn3client.autoload

Copy and paste the following text into the currently opened “myvpn3client.autoload” file with your nano editor.

{
   "autostart": true,
    "name": "myvpnclient",
    "acl": {
        "set-owner": "my_ubuntu_username"
    },
    "tunnel": {
        "ipv6": "no",
        "persist": true,
        "dns-fallback": "google",
        "dns-setup-disabled": false
    },
    "user-auth": {
        "username": "my_vpn_username",
        "password": "my_vpn_password"
    }
}

Fill in “my_ubuntu_username” “my_vpn_username” and “my_vpn_password” with your corresponding information. DO NOT DELETE THE QUOTES! Leave them. Your username should be the name that you registered when you set up your ubuntu installation. It should also be noted in your terminal on the left next to your computer’s hostname i.e. mrubuntu@mrubuntusdesktop.

Once you have finished filling in the blanks inside the quotes, press “control-X“, then “y” to save, and hit “Enter” to exit out of nano with a newly saved .autoload file.

Now, lets secure the permissions for your myopenvpn.conf and myopenvpn.autoload files.

sudo chmod 644 /etc/openvpn3/autoload/myvpn3client.conf && sudo chmod 644 /etc/openvpn3/autoload/myvpn3client.autoload

Now we’re ready to start your VPN. The following command will automatically connect your VPN on boot, as well as reconnect it if your internet connection drops, and restarts again. In other words, this will keep you connected to your vpn after reboot or connection failure.

Run this last command to do so:

sudo systemctl enable openvpn3-autoload.service

Now reboot and check to see if your vpn is connected by running the following command:

curl https://ipinfo.io/ip

It should show the IP Address of your vpn provider.

Next,

lets test to see if your DNS is leaking or not.

Download the dns command line dns leak test from github, and make it executable by your user by running the following command:

cd ~/ && curl https://raw.githubusercontent.com/macvk/dnsleaktest/master/dnsleaktest.sh -o dnsleaktest.sh && chmod +x dnsleaktest.sh

Run your dnsleaktest!

./dnsleaktest.sh

After a minute or so, it should show the IP addresses of your VPN provider. If it does not, then your dns may be leaking, and the leaktest will tell you that.

DONATE! If this tutorial it worked for you (which it should have), you could spread the love back and donate some change to my paypal, bitcoin address, or altcoin addresses.

PAYPAL:




BITCOIN (BTC) ADDRESS: 

bc1qxsqy0nl8f2rqsgpzzr8eh3c67vz7kjr2djyku4

BITCOIN CASH (BCH) ADDRESS: 

qzdkv8sz8zf57urafd8urhg7jdej6u892v3z088nvr

ETHEREUM (ETH) ADDRESS: 

0x8C33CD44a083D605DBb65Ba4eC201f30Af88705c

ZCASH (ZEC) ADDRESS: 

t1dxu9KN1pSYNoMNxYMzCNhcHJhGZmwPW9n

MONERO (XMR) ADDRESS:

4A2p4k6vSGviUxoZvwQkAX8VBQE6tQncmZUS5mZ8YS9cZ2BQ4cc2CZXdMVg4vtFoxh3XrXQECWm95Gq2FpyRtvFz2yNZuYy

FINISHED! Congratulations, you have successfully installed openvpn3 client on Ubuntu 20.04.